Toggle Hooks, Keys and Bits
Toggle hooks are known to be the best system for locking and registering hot stamping and embossing dies into position on honeycomb plates. They are available in 5 standard sizes: 0, 1, 2, 3E and 4.
Finishing specialists appreciate the ease and convenience of obtaining hairline die registration using toggle hooks. The combined forward and downward travel of the toggle hook lock the die firmly into place. A ten-degree bevel is required along the perimeter of the die.
At ALDUS MACHINES, we offer the ORIGINAL HOOKS at short delivery times and competitive prices.
Sterling toggle hooks are used in honeycomb plate mounting systems and are the industry’s highest quality standard for locking and registering embossing and foil stamping dies into position.
Standard Size:
Used with honeycomb chases with a thickness of 17mm-19mm.
Low Height Size:
Used with honeycomb chases with a thickness of 13.7mm-17mm.
Order Toggle Hooks
Toggle Hook #0
Standard:
60300000
Low height:
60303005
Toggle Hook #1
Standard:
60300001
Low height:
60303001
Toggle Hook #2
Standard:
60300002
Low height:
60303002
Toggle Hook #3E
Standard:
60300003
Low height:
60303003
Toggle Hook #4
Standard:
60300004
Low height:
60303004
Toggle Hook Tools
Toggle Key
Toggle key including 1 bit. The toggle key is used to lock toggle hooks up against the die.
Art.nr.:
60300006
Toggle Bit
Replacement bits for the toggle key. The damaged bit is easily removed and replaced.
Art.nr.:
60300007
Order Form for Toggle Hooks
To order Toggle Hooks, please click on the cards above. The associated hooks will then be added automatically to the message field inside the contact form. All selected toggle hooks will be listed below each other automatically.