This machine has been designed to spool or slit rolls on 1"/ 3"/6" inner diameter cores (1"and 6" are optional) to rolls on 1"/ 3"/6" inner diameter cores (1" and 6" are optional) by means of shear slitting or razor blade slitting (optional). The machine has been built according to the cantilevered principle.
| Shear slit unit with 3 knife holders incl. 3 top knives and 3 anvil (bottom) knives |
| One 3” unwind air shaft |
| Two 3” rewind air shafts |
| Adjustable speed |
| Web tension control by means of ultrasonic sensor control |
| Lay on rollers |
| Magnetic particle break |
| Large easy-to-use touch screen control panel |
| Electrical requirement: 1 Phase / 230 Volts / 2,5 Kw |
| Max. web tension: 50 Newton (2x25 Newton by optional independent rewind control) |
| Razor blade holder – 1mm pitch |
| Easy glide knife system |
| Pneumatic bottom knife shaft |
| Edge guider |
| 6" unwind air shaft |
| 1" unwind / rewind air shaft |
| Max. speed 250 mtr/min (XL=standard) |
| Unwind / rewind shaft support (XL=standard) |
| CLC-400 | CLC-400 XL | CLC-500 | CLC-500 XL | CLC-600 | CLC-600 XL | |
|---|---|---|---|---|---|---|
| Web width | 400 mm | 400 mm | 500 mm | 500 mm | 600 mm | 600 mm |
| Max. unwind diameter | 600 mm | 600 mm | 600 mm | 600 mm | 600 mm | 600 mm |
| Max. rewind diameter | 450 mm | 550 mm | 450 mm | 550 mm | 450 mm | 550 mm |
| Max. speed | 200 mtr / min | 250 mtr / min | 200 mtr / min | 250 mtr / min | 200 mtr / min | 250 mtr / min |
| Min. slit width shear slit | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm |
| Min. slit width razor blade | 9 mm | 9 mm | 9 mm | 9 mm | 9 mm | 9 mm |
| Min. unwinding width | 100 mm | 100 mm | 100 mm | 100 mm | 150 mm | 150 mm |
| Number of shear slits | 3 standard | 3 standard | 3 standard | 3 standard | 3 standard | 3 standard |