Characteristics
| Sheet size: 800 x 600 mm |
| Three operator panels, one for controlling foil system and two for controlling the machine |
| Maximum mechanical speed 7500 impressions per hour |
| Complete electric & electronical system |
| Fully automatic oil system for both main machine and drive chain |
| Self diagnosis system with indication on the screens |
| Lock for the gripper bar can be micro-adjusted |
| Gripper bars are made of special industrial aluminium with hardened grippers |
| Full sheet detection throughout the machine |
| Linear scale throughout the machine, both for paper and foil inspection |
| Robust construction |
| Pneumatic accurate main clutch |
| Automatic impression on and off by servo motors |
| Precise and accurate drive of the table |
| Calibrated top table |
| The chase is locked pneumatically |
| Height of the table is indicated in millimetres |
| Main drive chain equipped with security clutch |
| Operator’s platform with steps and guarding |
| Sheet inspection table with top lighting |
| Precise, controllable and consistent pressure |
| Fitted with the Mabeg feeder |
| Standard 300mm raised frame for higher feeding and delivery capacity |
| With table to prepare foil shafts outside the machine |
| Equipped with E-stops |
| Complies to CE norm |
Sections
| Feeder for quick set up and excellent for light weight paper as well as board at maximum speeds. |
| Paper range from 90 grs. - 2.0 mm |
| Non stop feeder system is standard and offers efficiency for long production runs |
| Double sheet detection |
| Push and pull side lays (operator and non-operator side) |
| Electronic side lay control |
| Two electronic front lay controls |
| Possibility to adjust timing of the inlay |
| Press bar |
| Safety during lowering the feeder table |
| Position of the feeder table can be adjusted during production |
| Becker Vacuum pump for feeder included |
| Automatic non-stop delivery is standard. The carpet moves in and out during production automatically |
| Brushes in delivery for sheet slowdown |
| Equipped with side and back pushers |
| Security during lowering of the delivery table |
| Paper insert device (included) |
| Air foil separator suitable for large full area stamping |
| Blower unit to stabilize the sheets |
| Automatic impression throw-off |
| Device to feed new foil into the machine |
| Equipped with shafts for foil converting with knives for foil slitting |
| 5 independently programmable foil advance shafts |
| 3 hologram registration units for printing registered holograms |
| Servomotors to control foil pulling |
| Programmable foil pulls and steps for foil advance optimization |
| Possibility of preparing the foil rolls on the shafts outside the machine for installation into the foil module (table included) |
| Programs can be stored in the central PLC |
| Adjustable dwell time |
| Timer |
| Equipped with evacuation brushes for wasted foil |
| Fitted with 20 digital heating zones controlled by Siemens PLC |
| Detection system for foil breaking (12 units) |
| Foil run out warning |
| Inner foil core diameter can be 1inch (25 mm) or 3inch (76 mm) |
| Machine can take up rolls as narrow as 20 mm without problems |
Specifications
| Maximum mechanical speed | 7500 IPH |
| Maximum sheet size | 800 x 600 mm |
| Minimum sheet size | 297 x 210 mm |
| Maximum stamping / embossing area | 760 x 580 mm |
| Maximum die-cutting area | 785 x 585 mm |
| Paper range | 90 grs - 2.0 mm |
| Grip distance | 7 mm |
| Maximum foil roll diameter | 250 mm |
| Number of foil pulls | 5 |
| Maximum foil advance | 800 mm |
| Temperature | 0 - 200 °C |
| Heating sectors | 20 |
| Pull resolution | 0.1 mm |
| Length | 597 cm |
| Width | 390 cm |
| Height | 237 cm |
| Nett weight | 13.000 kgs |
| Total capacity | 46 kW |
| Heating capacity | 21 kW |
| Height of feeder stack | 1400 mm |
| Height of delivery stack | 1150 mm in non stop condition |
| Maximum impression strength | 150 tonnes |