This machine is suitable for spooling and slitting jumbo rolls on 3" and 6" cores to master rolls on 1" and 3" cores by razor blade slitting or shear slitting (option).
| One 3" unwind air shaft |
| Two 1" steel rewind shafts |
| Adjustable speed |
| Maximum speed of 250 meters per minute |
| Maximum unwind roll diameter 700 mm |
| Maximum rewind roll diameter 350 mm |
| Minimum unwinding width 250 - 300 mm |
| Min. slitting width razor blade slitting: 9 mm |
| Min. slitting width shear slitting: 22 mm (option) |
| Powder magnetic brake |
| Count down meter: This meter counts down the pre-set number of meters to be spooled and automatically stops the machine as soon as the required number of meters has been reached. |
| Razor grid for accurate razor blade slitting – 1 mm pitch |
| Manual shear slit unit |
| Diameter sensor for controlling web tension |
| Splice table |
| 3" rewind air shaft |
| 1" rewind air shaft |
| 1" unwind air shaft |
| 6" unwind air shaft |
| Trim edge suction (left and right) |
| Lay-on rollers |
| Hydraulic jumbo lifting equipment |
| Laser core positioning system |
| VL840 (S) | VL840 (S/XL) | VL1300 (S) | VL1300 (S/XL) | VL1620 (S) | VL1620 (S/XL) | |
|---|---|---|---|---|---|---|
| Web width | 840 mm | 840 mm | 1300 mm | 1300 mm | 1620 mm | 1620 mm |
| Max. unwind diameter | 700 mm | 700 mm | 700 mm | 700 mm | 700 mm | 700 mm |
| Max. rewind diameter | 300 mm | 350 mm | 300 mm | 350 mm | 300 mm | 350 mm |
| Max. speed | 200 mtr/min | 250 mtr/min | 200 mtr/min | 250 mtr/min | 200 mtr/min | 250 mtr/min |
| Min. slit width shear slit | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm |
| Min. slit width razor blade | 9 mm | 9 mm | 9 mm | 9 mm | 9 mm | 9 mm |
| Min. unwinding width | 200 mm | 200 mm | 250 mm | 250 mm | 300 mm | 300 mm |
| Number of shear slits | 3 standard | 3 standard | 3 standard | 3 standard | 3 standard | 3 standard |